Merge branch 'master' of http://git.metaltriggers.com/pedal2metal

14 files changed, 1144 insertions, 86 deletions

diff --git a/firmware/drivers/cli.c b/firmware/drivers/cli.c
new file mode 100644
index 0000000..33c350e
--- /dev/null
+++ b/firmware/drivers/cli.c
@@ -0,0 +1,130 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/***************************************************************************
+ *            cli.c
+ *
+ *  Thu Jun  6 20:20:20 CEST 2013
+ *  Copyright 2013 Bent Bisballe Nyeng
+ *  deva@aasimon.org
+ ****************************************************************************/
+
+/*
+ *  This file is part of Pedal2Metal.
+ *
+ *  Pedal2Metal is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  Pedal2Metal is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with Pedal2Metal; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA.
+ */
+#include "cli.h"
+
+#include <stdarg.h>
+#include <string.h>
+
+#include "uart.h"
+
+void cli_init()
+{
+  UARTInit(0, 115200);	/* baud rate setting */
+}
+
+static int cli_strlen(char *p0)
+{
+  char *p = p0;
+  while(*p) p++;
+  return p0 - p;
+}
+
+static inline void cli_write_int(int i)
+{
+	if(i < 0) {
+		UARTSend(0, "-", 1);
+		i *= -1;
+	}
+
+	char buf[] = "\0\0";
+	int pos = 1000000000;
+	int tvaersum = 0;
+	while(pos) {
+		int res = i / pos;
+		i -= res * pos;
+
+		tvaersum += res;
+		if(tvaersum || pos == 1) {
+			buf[0] = res + '0';
+			UARTSend(0, buf, 1);
+		}
+		pos /= 10;
+	}
+}
+
+static inline char *cli_to_hex(char i)
+{
+	static const char hex[] = { '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'a', 'b', 'c', 'd', 'e', 'f' };
+	static char buf[] = { 'f', 'f', 0 };
+	buf[0] = hex[i / 16];
+	buf[1] = hex[i % 16];
+	return buf;
+}
+
+static int cli_write_format(const char *fmt, va_list ap)
+{
+	char buf[] = "\0\0";
+
+	const char *p = fmt;
+	while(*p) {
+		if(*p != '%') {
+			buf[0] = *p;
+
+      UARTSend(0, buf, 1);
+		} else {
+			p++;
+			if(!*p) {
+				return 1; // Error: Invalid format string
+			}
+			if(*p == '\n') UARTSend(0, "\n\r", 2);
+			if(*p == '%') UARTSend(0, "%", 1);
+			if(*p == 'd') cli_write_int(va_arg(ap, int));
+			if(*p == 'c') {
+				buf[0] = va_arg(ap, int);
+        UARTSend(0, buf, 1);
+			}
+			if(*p == 'x') {
+				char *c = va_arg(ap, char *);
+				size_t sz = va_arg(ap, int);
+				while(sz) {
+          UARTSend(0, cli_to_hex(*c), 2);
+					c++; sz--;
+				}
+			}
+			if(*p == 's') {
+				char *str = va_arg(ap, char *);
+        UARTSend(0, str, cli_strlen(str));
+			}
+		}
+		p++;
+	}
+
+	// If last character wasn't a newline, print one.
+	if(p > fmt && *(p - 1) != '\n') UARTSend(0, "\n\r", 2);
+
+	return 0;
+}
+
+int cli_write(const char *fmt, ...)
+{
+  va_list ap;
+	va_start(ap, fmt);
+	cli_write_format(fmt, ap);
+	va_end(ap);
+
+	return 0;
+}
diff --git a/firmware/drivers/cli.h b/firmware/drivers/cli.h
new file mode 100644
index 0000000..ecc373b
--- /dev/null
+++ b/firmware/drivers/cli.h
@@ -0,0 +1,33 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/***************************************************************************
+ *            cli.h
+ *
+ *  Thu Jun  6 20:20:20 CEST 2013
+ *  Copyright 2013 Bent Bisballe Nyeng
+ *  deva@aasimon.org
+ ****************************************************************************/
+
+/*
+ *  This file is part of Pedal2Metal.
+ *
+ *  Pedal2Metal is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  Pedal2Metal is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with Pedal2Metal; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA.
+ */
+#ifndef __PEDAL2METAL_CLI_H__
+#define __PEDAL2METAL_CLI_H__
+
+void cli_init();
+int cli_write(const char *fmt, ...);
+
+#endif/*__PEDAL2METAL_CLI_H__*/
diff --git a/firmware/drivers/led.c b/firmware/drivers/led.c
new file mode 100644
index 0000000..fe8d6f5
--- /dev/null
+++ b/firmware/drivers/led.c
@@ -0,0 +1,55 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/***************************************************************************
+ *            led.c
+ *
+ *  Sun Jun  9 12:51:55 CEST 2013
+ *  Copyright 2013 Bent Bisballe Nyeng
+ *  deva@aasimon.org
+ ****************************************************************************/
+
+/*
+ *  This file is part of Pedal2Metal.
+ *
+ *  Pedal2Metal is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  Pedal2Metal is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with Pedal2Metal; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA.
+ */
+#include "led.h"
+
+#include <LPC17xx.h>
+
+int led_state = 0;
+
+void LED_Init()
+{
+	LPC_SC->PCONP |= ( 1 << 15 ); // power up GPIO
+	LPC_GPIO1->FIODIR |= 1 << 29; // puts P1.29 into output mode.
+}
+
+void LED_on()
+{
+  led_state = 1;
+  LPC_GPIO1->FIOPIN |= 1 << 29; // make P1.29 high
+}
+
+void LED_off()
+{
+  led_state = 0;
+  LPC_GPIO1->FIOPIN &= ~( 1 << 29 ); // make P1.29 low
+}
+
+void LED_toggle()
+{
+  if(led_state) LED_off();
+  else LED_on();
+}
diff --git a/firmware/drivers/led.h b/firmware/drivers/led.h
new file mode 100644
index 0000000..2c81474
--- /dev/null
+++ b/firmware/drivers/led.h
@@ -0,0 +1,35 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/***************************************************************************
+ *            led.h
+ *
+ *  Sun Jun  9 12:51:55 CEST 2013
+ *  Copyright 2013 Bent Bisballe Nyeng
+ *  deva@aasimon.org
+ ****************************************************************************/
+
+/*
+ *  This file is part of Pedal2Metal.
+ *
+ *  Pedal2Metal is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  Pedal2Metal is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with Pedal2Metal; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA.
+ */
+#ifndef __PEDAL2METAL_LED_H__
+#define __PEDAL2METAL_LED_H__
+
+void LED_Init();
+void LED_on();
+void LED_off();
+void LED_toggle();
+
+#endif/*__PEDAL2METAL_LED_H__*/
diff --git a/firmware/drivers/spi.c b/firmware/drivers/spi.c
new file mode 100644
index 0000000..6209a03
--- /dev/null
+++ b/firmware/drivers/spi.c
@@ -0,0 +1,264 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/***************************************************************************
+ *            spi.c
+ *
+ *  Sun Jun  9 14:02:49 CEST 2013
+ *  Copyright 2013 Bent Bisballe Nyeng
+ *  deva@aasimon.org
+ ****************************************************************************/
+
+/*
+ *  This file is part of Pedal2Metal.
+ *
+ *  Pedal2Metal is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  Pedal2Metal is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with Pedal2Metal; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA.
+ */
+#include "spi.h"
+
+#include <LPC17xx.h>
+
+
+#define USE_CMSIS
+
+#ifdef USE_CMSIS
+#include <lpc17xx_spi.h>
+#include <lpc17xx_pinsel.h>
+
+LPC_SPI_TypeDef *spi;
+#else/*USE_CMSIS*/
+
+// SPI power bit in PCONP register (see table 46)
+#define PCSPI_BIT 8
+
+// SPI clock bits (16 and 17) in PCLKSEL0 register (see table 40)
+#define PCLK_SPI_BIT 16
+
+// Clock speed devisors. Values for PCLKSEL0 register (See table 42)
+typedef enum {
+  CCLK_4 = 0x0, // 00: PCLK_peripheral = CCLK/4
+  CCLK_1 = 0x1, // 01: PCLK_peripheral = CCLK
+  CCLK_2 = 0x2, // 10: PCLK_peripheral = CCLK/2
+  CCLK_8 = 0x3, // 11: PCLK_peripheral = CCLK/8
+} ClockDevisor;
+
+// PINSEL0 function value for SCK0 function (see table 79)
+#define SCK0_FUNCTION 0x2
+#define SCK0_BIT 30
+
+// PINSEL1 function value for SSEL0 function (see table 80)
+#define SSEL0_FUNCTION 0x2
+#define SSEL0_BIT 0
+
+// PINSEL1 function value for MISO0 function (see table 80)
+#define MISO0_FUNCTION 0x2
+#define MISO0_BIT 2
+
+// PINSEL1 function value for MOSI0 function (see table 80)
+#define MOSI0_FUNCTION 0x2
+#define MOSI0_BIT 4
+
+#endif/*USE_CMSIS*/
+
+/**
+ * Initialisation as described in "17.1 Basic Configuration"
+ */
+void spi_init()
+{
+#ifdef USE_CMSIS
+  SPI_CFG_Type spi_cfg;
+
+  // 16 bit data transfers
+	spi_cfg.Databit = SPI_DATABIT_8;
+
+	// WM8523 samples bits on rising edges. Mode 0 or 3 will work
+	// http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus#Clock_polarity_and_phase
+
+	// Mode 0
+	spi_cfg.CPHA = SPI_CPHA_FIRST; // 0
+	spi_cfg.CPOL = SPI_CPOL_HI; // 0
+	/*
+	// Mode 3
+	spi_cfg.CPHA = SPI_CPHA_SECOND; // 1
+	spi_cfg.CPOL = SPI_CPOL_LO; // 1
+	*/
+
+	// We are the master
+	spi_cfg.Mode = SPI_MASTER_MODE;
+
+	// We run on a little endian mcu.
+	spi_cfg.DataOrder = SPI_DATA_MSB_FIRST;
+
+	// Se WM8523 manual page 14. Min clock pulse width 40ns ~= 25MHz
+	spi_cfg.ClockRate = 1000;//1000000000; // 1MHz
+
+  spi = LPC_SPI;
+	SPI_Init(spi, &spi_cfg);
+
+  NVIC_EnableIRQ(SPI_IRQn);
+
+#else/*USE_CMSIS*/
+  // Power up the SPI bus.
+  // Remark: On reset, the SPI is enabled (PCSPI = 1).
+  LPC_SC->PCONP |= (1 << PCSPI_BIT); // set bit 8 in PCONP (PCSPI bit)
+
+  // Set clock speed (indirectly as clock devisor)
+  ClockDevisor clk = CCLK_8; 
+  LPC_SC->PCLKSEL0 &= ~(0x3 << PCLK_SPI_BIT);
+  LPC_SC->PCLKSEL0 |= ((clk & 0x3) << PCLK_SPI_BIT); // set bit 16 and 17 in PCLKSEL0
+
+  // Make pin selection for SPI.
+  // SCK0:  P1.20
+  // SSEL0: P1.21
+  // MOSI0: P1.23
+  // MISO0: P1.24
+  LPC_PINCON->PINSEL0 &= ~(0x3 << SCK0_BIT);
+  LPC_PINCON->PINSEL0 |= (SCK0_FUNCTION << SCK0_BIT);
+
+  LPC_PINCON->PINSEL1 &= ~(0x3 << SSEL0_BIT);
+  LPC_PINCON->PINSEL1 |= (SSEL0_FUNCTION << SSEL0_BIT);
+
+  LPC_PINCON->PINSEL1 &= ~(0x3 << MISO0_BIT);
+  LPC_PINCON->PINSEL1 |= (MISO0_FUNCTION << MISO0_BIT);
+
+  LPC_PINCON->PINSEL1 &= ~(0x3 << MOSI0_BIT);
+  LPC_PINCON->PINSEL1 |= (MOSI0_FUNCTION << MOSI0_BIT);
+
+  // Enable SPI interrupt:
+  // Set SPI interrupt flag (see table 367)
+  LPC_SPI->SPINT = 1;
+
+  // Enable SPI interrupt in the NVIC (see table 50)
+  NVIC_EnableIRQ(SPI_IRQn);
+#endif/*USE_CMSIS*/
+
+  // Configure SSEL pin:
+  LPC_GPIO1->FIODIR |= 1 << 21; // Set 1.21 in output mode
+
+}
+
+void spi_deinit()
+{
+#ifdef USE_CMSIS
+#else/*USE_CMSIS*/
+  // Power down SPI
+  LPC_SC->PCONP &= ~(1 << PCSPI_BIT); // unset bit 8 in PCONP (PCSPI bit)
+#endif/*USE_CMSIS*/
+}
+
+// S0SPCR register (see table 361)
+#define BENA 0 // Enable more than 8 bit transactions
+#define CPHA 0 // CPHA (Clock Phase Control)     \ _ Mode 0
+#define CPOL 0 // CPOL (Clock Polarity Control)  /
+#define MSTR 1 // MSTR (Master Mode Select)
+#define LSB  1 // LSB vs MSB
+#define SPIE 1 // Enable interrupts
+#define BITS 0 // Bits to transfer, only use if BENA is set to 1
+void spi_configure()
+{
+#ifdef USE_CMSIS
+#else/*USE_CMSIS*/
+  // S0SPCR register (see table 361)
+  LPC_SPI->SPCR = (BENA << 2) | (CPHA << 3) | (CPOL << 4) | (MSTR << 5) |
+    (LSB  << 6) | (SPIE << 7) | (BITS << 8);
+
+  LPC_SPI->SPCCR = 1;
+#endif/*USE_CMSIS*/
+}
+
+static volatile int spi_done = 0;
+static void spi_mark_as_done()
+{
+  spi_done = 1;
+}
+
+volatile int temp;
+void __delay(uint32_t del)
+{
+    uint32_t i;
+    for(i=0;i<del;i++)
+        temp = i;
+}
+
+void spi_read_write(uint8_t *tx_data, uint8_t *rx_data, size_t length)
+{
+#ifdef USE_CMSIS
+
+  SPI_DATA_SETUP_Type dst;
+  dst.tx_data = tx_data;
+  dst.rx_data = rx_data;
+  dst.length = length;
+  dst.counter = 0;
+  dst.status = 0;
+  dst.callback = spi_mark_as_done;
+
+  SPI_ClearIntPending(spi);
+  LPC_GPIO1->FIOPIN &= ~( 1 << 21 ); // make P1.21 low
+
+  spi_done = 0;
+  SPI_ReadWrite(spi, &dst, SPI_TRANSFER_POLLING);//SPI_TRANSFER_INTERRUPT);
+
+  cli_write(">");
+  while (!(SPI_GetStatus(spi) & SPI_SPSR_SPIF)) { }
+  //while(!spi_done) {}
+  cli_write("<");
+
+  LPC_GPIO1->FIOPIN |= 1 << 21; // make P1.29 high
+
+#else/*USE_CMSIS*/
+
+  int i = 0;
+  cli_write(">>");
+
+  LPC_GPIO1->FIOPIN &= ~( 1 << 21 ); // make P1.21 low
+
+  for(; i < length; i++) {
+    /*
+    cli_write("w");
+    LPC_GPIO1->FIOPIN &= ~( 1 << 21 ); // make P1.21 low
+    __delay(1 << 23);
+    */
+
+    //LPC_SPI->SPINT = 1; // Clear interrupt (see section 17.7.7)
+    //if(LPC_SPI->SPSR) {} // Make sure we clear the status register
+
+    LPC_SPI->SPDR = tx_data[i];
+
+    //cli_write("[%d]", tx_data[i]);
+
+    //if(LPC_SPI->SPSR) {} // Make sure we clear the status register
+
+    // Check SPIF bit (see table 362)
+    //while(((LPC_SPI->SPSR << 7) & 0x1) != 1) {}
+    //while(LPC_SPI->SPSR == 0) {} // Wait for status register
+    while(LPC_SPI->SPINT == 0) {} // Wait for interrupt
+    LPC_SPI->SPINT = 1;
+    //__delay(1 << 23);
+
+    // cli_write("{%d}", LPC_SPI->SPSR);
+
+    rx_data[i] = LPC_SPI->SPDR;
+    //cli_write("[%d]", rx_data[i]);
+
+    /*
+    cli_write("r");
+    LPC_GPIO1->FIOPIN |= 1 << 21; // make P1.29 high
+    __delay(1 << 23);
+    */
+  }
+
+  LPC_GPIO1->FIOPIN |= 1 << 21; // make P1.29 high
+
+  cli_write("<<");
+#endif/*USE_CMSIS*/
+}
diff --git a/firmware/drivers/spi.h b/firmware/drivers/spi.h
new file mode 100644
index 0000000..b2ecf5a
--- /dev/null
+++ b/firmware/drivers/spi.h
@@ -0,0 +1,37 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/***************************************************************************
+ *            spi.h
+ *
+ *  Sun Jun  9 14:02:49 CEST 2013
+ *  Copyright 2013 Bent Bisballe Nyeng
+ *  deva@aasimon.org
+ ****************************************************************************/
+
+/*
+ *  This file is part of Pedal2Metal.
+ *
+ *  Pedal2Metal is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  Pedal2Metal is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with Pedal2Metal; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA.
+ */
+#ifndef __PEDAL2METAL_SPI_H__
+#define __PEDAL2METAL_SPI_H__
+
+#include <stdint.h>
+#include <stdlib.h>
+
+void spi_init();
+void spi_deinit();
+void spi_read_write(uint8_t *tx_data, uint8_t *rx_data, size_t length);
+
+#endif/*__PEDAL2METAL_SPI_H__*/
diff --git a/firmware/src/uart.c b/firmware/drivers/uart.c
index d3ac789..28a6e00 100644
--- a/firmware/src/uart.c
+++ b/firmware/drivers/uart.c
@@ -135,7 +135,7 @@ uint32_t UARTInit( uint32_t PortNum, uint32_t baudrate )
 ** Returned value:		None

 ** 

 *****************************************************************************/

-void UARTSend( uint32_t portNum, uint8_t *BufferPtr, uint32_t Length )

+void UARTSend( uint32_t portNum, char *BufferPtr, uint32_t Length )

 {

   if ( portNum == 0 )

   {

diff --git a/firmware/src/uart.h b/firmware/drivers/uart.h
index 870f581..24b8259 100644
--- a/firmware/src/uart.h
+++ b/firmware/drivers/uart.h
@@ -20,6 +20,8 @@
 #ifndef __UART_H 

 #define __UART_H

 

+#include <stdint.h>

+

 #define IER_RBR		0x01

 #define IER_THRE	0x02

 #define IER_RLS		0x04

@@ -42,7 +44,7 @@
 #define BUFSIZE		0x40

 

 uint32_t UARTInit( uint32_t portNum, uint32_t Baudrate );

-void UARTSend(uint32_t portNum,  uint8_t *BufferPtr, uint32_t Length );

+void UARTSend(uint32_t portNum,  char *BufferPtr, uint32_t Length );

 

 #endif /* end __UART_H */

 /*****************************************************************************

diff --git a/firmware/drivers/wm8523.c b/firmware/drivers/wm8523.c
index 36d293a..08b8d97 100644
--- a/firmware/drivers/wm8523.c
+++ b/firmware/drivers/wm8523.c
@@ -27,100 +27,69 @@
 #include "wm8523.h"
 
 #include <string.h>
-#include <lpc17xx_spi.h>
+#include <cli.h>
+
+#include "spi.h"
 
 #define WM8523_WRITE 0
 #define WM8523_READ 1
 
-static SPI_CFG_Type spi_cfg;
-static LPC_SPI_TypeDef spi;
-
-typedef struct __attribute__ ((packed)) {
-  uint8_t rw:1; ///< See WM8523_WRITE and WM8523_READ
-  uint8_t reg:7; ///< See page 35 in the WM8523 manual.
-  uint16_t data;
+typedef union {
+  struct __attribute__ ((packed)) {
+    uint8_t rw:1; ///< See WM8523_WRITE and WM8523_READ
+    uint8_t reg:7; ///< See page 35 in the WM8523 manual.
+    uint16_t data;
+  } val;
+  uint8_t data[3];
 } WM8523_transfer_t;
 
-void WM8523_Init()
-{
-  // 16 bit data tranfers
-	spi_cfg.Databit = SPI_DATABIT_16;
-
-	// WM8523 samples bits on rising edges. Mode 0 or 3 will work
-	// http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus#Clock_polarity_and_phase
-
-	// Mode 0
-	spi_cfg.CPHA = SPI_CPHA_FIRST; // 0
-	spi_cfg.CPOL = SPI_CPOL_HI; // 0
-	/*
-	// Mode 3
-	spi_cfg.CPHA = SPI_CPHA_SECOND; // 1
-	spi_cfg.CPOL = SPI_CPOL_LO; // 1
-	*/
-
-	// We are the master
-	spi_cfg.Mode = SPI_MASTER_MODE;
-
-	// We run on a little endian mcu.
-	spi_cfg.DataOrder = SPI_DATA_LSB_FIRST;
-
-	// Se WM8523 manual page 14. Min clock pulse width 40ns ~= 25MHz
-	spi_cfg.ClockRate = 1000000000; // 1MHz
-
-	SPI_Init(&spi, &spi_cfg);
+void WM8523_init()
+{  
+  cli_write("sizeof: %d", sizeof(WM8523_transfer_t));
+  spi_init();
 }
 
-static volatile int spi_done = 0;
-void spi_mark_as_done()
+void WM8523_deinit()
 {
-  spi_done = 1;
+  spi_deinit();
 }
 
-static void send(void *data, size_t size)
+void WM8523_write(uint8_t reg, uint16_t data)
 {
-  SPI_DATA_SETUP_Type dst;
-  memset(&dst, 0, sizeof(dst));
-  dst.rx_data = data;
-  dst.length = size;
-  dst.callback = spi_mark_as_done;
-  
-  spi_done = 0;
-  SPI_ReadWrite(&spi, &dst, SPI_TRANSFER_INTERRUPT);
+  WM8523_transfer_t t;
+  t.val.rw = WM8523_WRITE;
+  t.val.reg = reg;
+  t.val.data = data;
 
-  while(!spi_done) {}
+  WM8523_transfer_t r;
+  r.val.data = 0xffff;
+
+  spi_read_write(t.data, r.data, 3);
 }
 
-static void receive(void *data, size_t size)
+uint16_t WM8523_read(uint8_t reg)
 {
-  // http://anhnvnguyen.blogspot.dk/2010/04/lpc17xx-gpio-basic_05.html
-  // TODO: set SSEL0 low
-  // PINSEL3[13:12] = p1.21 (SSEL0)
-  LPC_PINCON->PINSEL3 &= ~((1<<13)|(1<<12)); // set to 00
-
-  SPI_DATA_SETUP_Type dst;
-  memset(&dst, 0, sizeof(dst));
-  dst.tx_data = data;
-  dst.length = size;
-  dst.callback = spi_mark_as_done;
+  WM8523_transfer_t t;
+  t.val.rw = WM8523_READ;
+  t.val.reg = reg;
+  t.val.data = 0xffff;
   
-  spi_done = 0;
-  SPI_ReadWrite(&spi, &dst, SPI_TRANSFER_INTERRUPT);
-  
-  while(!spi_done) {}
+  WM8523_transfer_t r;
 
-  // TODO: set SSEL0 high
+  spi_read_write(t.data, r.data, 3);
+  
+  return r.data[0] | (r.data[1] << 8);//r.val.data;
 }
 
 /**
 Volume update registers R06h and R07h are unavailable in SPI control mode.
 To use volume update in software control mode, I2C mode must be used.
 */
-void WM8523_Configure()
+void WM8523_configure()
 {
-  WM8523_transfer_t transfer;
-  transfer.rw = WM8523_READ;
-  transfer.reg = 0; // R0 read version : 0x8523
-  transfer.data = 0;
-  //send(&transfer, sizeof(transfer));
-  receive(&transfer, sizeof(transfer));
+  spi_configure();
+
+  uint16_t id = WM8523_read(0); // Read chip id from reg0.
+
+  cli_write("=%d=", id); // should be 34595 (0x8523)
 }
diff --git a/firmware/drivers/wm8523.h b/firmware/drivers/wm8523.h
index 085b1f4..e1bb8bc 100644
--- a/firmware/drivers/wm8523.h
+++ b/firmware/drivers/wm8523.h
@@ -27,7 +27,11 @@
 #ifndef __PEDAL2METAL_WM8523_H__
 #define __PEDAL2METAL_WM8523_H__
 
-void WM8523_Init();
-void WM8523_Configure();
+#include <stdint.h>
+
+void WM8523_init();
+void WM8523_configure();
+uint16_t WM8523_read(uint8_t reg);
+void WM8523_write(uint8_t reg, uint16_t data);
 
 #endif/*__PEDAL2METAL_WM8523_H__*/
diff --git a/firmware/lpc17xx/lpc17xx_pinsel.c b/firmware/lpc17xx/lpc17xx_pinsel.c
new file mode 100644
index 0000000..c459217
--- /dev/null
+++ b/firmware/lpc17xx/lpc17xx_pinsel.c
@@ -0,0 +1,308 @@
+/**

+ * @file	: lpc17xx_pinsel.c

+ * @brief	: Contains all functions support for Pin connect block firmware

+ * 				library on LPC17xx

+ * @version	: 1.0

+ * @date	: 25. Feb. 2009

+ * @author	: HoanTran

+ **************************************************************************

+ * Software that is described herein is for illustrative purposes only

+ * which provides customers with programming information regarding the

+ * products. This software is supplied "AS IS" without any warranties.

+ * NXP Semiconductors assumes no responsibility or liability for the

+ * use of the software, conveys no license or title under any patent,

+ * copyright, or mask work right to the product. NXP Semiconductors

+ * reserves the right to make changes in the software without

+ * notification. NXP Semiconductors also make no representation or

+ * warranty that such application will be suitable for the specified

+ * use without further testing or modification.

+ **********************************************************************/

+

+/* Peripheral group ----------------------------------------------------------- */

+/** @addtogroup PINSEL

+ * @{

+ */

+

+/* Includes ------------------------------------------------------------------- */

+#include "lpc17xx_pinsel.h"

+

+

+/* Public Functions ----------------------------------------------------------- */

+/** @addtogroup PINSEL_Public_Functions

+ * @{

+ */

+

+/*********************************************************************//**

+ * @brief 		Setup the pin selection function

+ * @param[in]	portnum PORT number,

+ * 				should be one of the following:

+ * 				- PINSEL_PORT_0	: Port 0

+ * 				- PINSEL_PORT_1	: Port 1

+ * 				- PINSEL_PORT_2	: Port 2

+ * 				- PINSEL_PORT_3	: Port 3

+ *

+ * @param[in]	pinnum	Pin number,

+ * 				should be one of the following:

+				- PINSEL_PIN_0 : Pin 0

+				- PINSEL_PIN_1 : Pin 1

+				- PINSEL_PIN_2 : Pin 2

+				- PINSEL_PIN_3 : Pin 3

+				- PINSEL_PIN_4 : Pin 4

+				- PINSEL_PIN_5 : Pin 5

+				- PINSEL_PIN_6 : Pin 6

+				- PINSEL_PIN_7 : Pin 7

+				- PINSEL_PIN_8 : Pin 8

+				- PINSEL_PIN_9 : Pin 9

+				- PINSEL_PIN_10 : Pin 10

+				- PINSEL_PIN_11 : Pin 11

+				- PINSEL_PIN_12 : Pin 12

+				- PINSEL_PIN_13 : Pin 13

+				- PINSEL_PIN_14 : Pin 14

+				- PINSEL_PIN_15 : Pin 15

+				- PINSEL_PIN_16 : Pin 16

+				- PINSEL_PIN_17 : Pin 17

+				- PINSEL_PIN_18 : Pin 18

+				- PINSEL_PIN_19 : Pin 19

+				- PINSEL_PIN_20 : Pin 20

+				- PINSEL_PIN_21 : Pin 21

+				- PINSEL_PIN_22 : Pin 22

+				- PINSEL_PIN_23 : Pin 23

+				- PINSEL_PIN_24 : Pin 24

+				- PINSEL_PIN_25 : Pin 25

+				- PINSEL_PIN_26 : Pin 26

+				- PINSEL_PIN_27 : Pin 27

+				- PINSEL_PIN_28 : Pin 28

+				- PINSEL_PIN_29 : Pin 29

+				- PINSEL_PIN_30 : Pin 30

+				- PINSEL_PIN_31 : Pin 31

+

+ * @param[in] 	funcnum Function number,

+ * 				should be one of the following:

+ *				- PINSEL_FUNC_0 : default function

+ *				- PINSEL_FUNC_1 : first alternate function

+ *				- PINSEL_FUNC_2 : second alternate function

+ *				- PINSEL_FUNC_3 : third alternate function

+ *

+ * @return 		None

+ **********************************************************************/

+void PINSEL_SetPinFunc ( uint8_t portnum, uint8_t pinnum, uint8_t funcnum)

+{

+	uint32_t pinnum_t = pinnum;

+	uint32_t pinselreg_idx = 2 * portnum;

+	uint32_t *pPinCon = (uint32_t *)&LPC_PINCON->PINSEL0;

+

+	if (pinnum_t >= 16) {

+		pinnum_t -= 16;

+		pinselreg_idx++;

+	}

+	*(uint32_t *)(pPinCon + pinselreg_idx) &= ~(0x03UL << (pinnum_t * 2));

+	*(uint32_t *)(pPinCon + pinselreg_idx) |= ((uint32_t)funcnum) << (pinnum_t * 2);

+}

+

+

+

+/*********************************************************************//**

+ * @brief 		Configure trace function

+ * @param[in] 	NewState State of the Trace function configuration,

+ * 				should be one of the following:

+ * 				- ENABLE : Enable Trace Function

+ * 				- DISABLE : Disable Trace Function

+ *

+ * @return 		None

+ **********************************************************************/

+void PINSEL_ConfigTraceFunc(FunctionalState NewState)

+{

+	if (NewState == ENABLE) {

+		LPC_PINCON->PINSEL10 |= (0x01UL << 3);

+	} else if (NewState == DISABLE) {

+		LPC_PINCON->PINSEL10 &= ~(0x01UL << 3);

+	}

+}

+

+

+

+/*********************************************************************//**

+ * @brief 		Setup resistor mode for each pin

+ * @param[in]	portnum PORT number,

+ * 				should be one of the following:

+ * 				- PINSEL_PORT_0	: Port 0

+ * 				- PINSEL_PORT_1	: Port 1

+ * 				- PINSEL_PORT_2	: Port 2

+ * 				- PINSEL_PORT_3	: Port 3

+ * @param[in]	pinnum	Pin number,

+ * 				should be one of the following:

+				- PINSEL_PIN_0 : Pin 0

+				- PINSEL_PIN_1 : Pin 1

+				- PINSEL_PIN_2 : Pin 2

+				- PINSEL_PIN_3 : Pin 3

+				- PINSEL_PIN_4 : Pin 4

+				- PINSEL_PIN_5 : Pin 5

+				- PINSEL_PIN_6 : Pin 6

+				- PINSEL_PIN_7 : Pin 7

+				- PINSEL_PIN_8 : Pin 8

+				- PINSEL_PIN_9 : Pin 9

+				- PINSEL_PIN_10 : Pin 10

+				- PINSEL_PIN_11 : Pin 11

+				- PINSEL_PIN_12 : Pin 12

+				- PINSEL_PIN_13 : Pin 13

+				- PINSEL_PIN_14 : Pin 14

+				- PINSEL_PIN_15 : Pin 15

+				- PINSEL_PIN_16 : Pin 16

+				- PINSEL_PIN_17 : Pin 17

+				- PINSEL_PIN_18 : Pin 18

+				- PINSEL_PIN_19 : Pin 19

+				- PINSEL_PIN_20 : Pin 20

+				- PINSEL_PIN_21 : Pin 21

+				- PINSEL_PIN_22 : Pin 22

+				- PINSEL_PIN_23 : Pin 23

+				- PINSEL_PIN_24 : Pin 24

+				- PINSEL_PIN_25 : Pin 25

+				- PINSEL_PIN_26 : Pin 26

+				- PINSEL_PIN_27 : Pin 27

+				- PINSEL_PIN_28 : Pin 28

+				- PINSEL_PIN_29 : Pin 29

+				- PINSEL_PIN_30 : Pin 30

+				- PINSEL_PIN_31 : Pin 31

+

+ * @param[in] 	modenum: Mode number,

+ * 				should be one of the following:

+				- PINSEL_PINMODE_PULLUP	: Internal pull-up resistor

+				- PINSEL_PINMODE_TRISTATE : Tri-state

+				- PINSEL_PINMODE_PULLDOWN : Internal pull-down resistor

+

+ * @return 		None

+ **********************************************************************/

+void PINSEL_SetResistorMode ( uint8_t portnum, uint8_t pinnum, uint8_t modenum)

+{

+	uint32_t pinnum_t = pinnum;

+	uint32_t pinmodereg_idx = 2 * portnum;

+	uint32_t *pPinCon = (uint32_t *)&LPC_PINCON->PINMODE0;

+

+	if (pinnum_t >= 16) {

+		pinnum_t -= 16;

+		pinmodereg_idx++ ;

+	}

+

+	*(uint32_t *)(pPinCon + pinmodereg_idx) &= ~(0x03UL << (pinnum_t * 2));

+	*(uint32_t *)(pPinCon + pinmodereg_idx) |= ((uint32_t)modenum) << (pinnum_t * 2);

+}

+

+

+

+/*********************************************************************//**

+ * @brief 		Setup Open drain mode for each pin

+ * @param[in]	portnum PORT number,

+ * 				should be one of the following:

+ * 				- PINSEL_PORT_0	: Port 0

+ * 				- PINSEL_PORT_1	: Port 1

+ * 				- PINSEL_PORT_2	: Port 2

+ * 				- PINSEL_PORT_3	: Port 3

+ *

+ * @param[in]	pinnum	Pin number,

+ * 				should be one of the following:

+				- PINSEL_PIN_0 : Pin 0

+				- PINSEL_PIN_1 : Pin 1

+				- PINSEL_PIN_2 : Pin 2

+				- PINSEL_PIN_3 : Pin 3

+				- PINSEL_PIN_4 : Pin 4

+				- PINSEL_PIN_5 : Pin 5

+				- PINSEL_PIN_6 : Pin 6

+				- PINSEL_PIN_7 : Pin 7

+				- PINSEL_PIN_8 : Pin 8

+				- PINSEL_PIN_9 : Pin 9

+				- PINSEL_PIN_10 : Pin 10

+				- PINSEL_PIN_11 : Pin 11

+				- PINSEL_PIN_12 : Pin 12

+				- PINSEL_PIN_13 : Pin 13

+				- PINSEL_PIN_14 : Pin 14

+				- PINSEL_PIN_15 : Pin 15

+				- PINSEL_PIN_16 : Pin 16

+				- PINSEL_PIN_17 : Pin 17

+				- PINSEL_PIN_18 : Pin 18

+				- PINSEL_PIN_19 : Pin 19

+				- PINSEL_PIN_20 : Pin 20

+				- PINSEL_PIN_21 : Pin 21

+				- PINSEL_PIN_22 : Pin 22

+				- PINSEL_PIN_23 : Pin 23

+				- PINSEL_PIN_24 : Pin 24

+				- PINSEL_PIN_25 : Pin 25

+				- PINSEL_PIN_26 : Pin 26

+				- PINSEL_PIN_27 : Pin 27

+				- PINSEL_PIN_28 : Pin 28

+				- PINSEL_PIN_29 : Pin 29

+				- PINSEL_PIN_30 : Pin 30

+				- PINSEL_PIN_31 : Pin 31

+

+ * @param[in]	modenum  Open drain mode number,

+ * 				should be one of the following:

+ * 				- PINSEL_PINMODE_NORMAL : Pin is in the normal (not open drain) mode

+ * 				- PINSEL_PINMODE_OPENDRAIN : Pin is in the open drain mode

+ *

+ * @return 		None

+ **********************************************************************/

+void PINSEL_SetOpenDrainMode( uint8_t portnum, uint8_t pinnum, uint8_t modenum)

+{

+	uint32_t *pPinCon = (uint32_t *)&LPC_PINCON->PINMODE_OD0;

+

+	if (modenum == PINSEL_PINMODE_OPENDRAIN){

+		*(uint32_t *)(pPinCon + portnum) |= (0x01UL << pinnum);

+	} else {

+		*(uint32_t *)(pPinCon + portnum) &= ~(0x01UL << pinnum);

+	}

+}

+

+

+

+/*********************************************************************//**

+ * @brief 		Setup I2C0 pins

+ * @param[in]	i2cPinMode I2C pin mode,

+ * 				should be one of the following:

+ * 				- PINSEL_I2C_Normal_Mode : The standard drive mode

+ * 				- PINSEL_I2C_Fast_Mode : Fast Mode Plus drive mode

+ *

+ * @param[in]	filterSlewRateEnable  should be:

+ * 				- ENABLE: Enable filter and slew rate.

+ * 				- DISABLE: Disable filter and slew rate.

+ *

+ * @return 		None

+ **********************************************************************/

+void PINSEL_SetI2C0Pins(uint8_t i2cPinMode, FunctionalState filterSlewRateEnable)

+{

+	uint32_t regVal;

+

+	if (i2cPinMode == PINSEL_I2C_Fast_Mode){

+		regVal = PINSEL_I2CPADCFG_SCLDRV0 | PINSEL_I2CPADCFG_SDADRV0;

+	}

+

+	if (filterSlewRateEnable == DISABLE){

+		regVal = PINSEL_I2CPADCFG_SCLI2C0 | PINSEL_I2CPADCFG_SDAI2C0;

+	}

+	LPC_PINCON->I2CPADCFG = regVal;

+}

+

+

+/*********************************************************************//**

+ * @brief 		Configure Pin corresponding to specified parameters passed

+ * 				in the PinCfg

+ * @param[in]	PinCfg	Pointer to a PINSEL_CFG_Type structure

+ *                    that contains the configuration information for the

+ *                    specified pin.

+ * @return 		None

+ **********************************************************************/

+void PINSEL_ConfigPin(PINSEL_CFG_Type *PinCfg)

+{

+	PINSEL_SetPinFunc(PinCfg->Portnum, PinCfg->Pinnum, PinCfg->Funcnum);

+	PINSEL_SetResistorMode(PinCfg->Portnum, PinCfg->Pinnum, PinCfg->Pinmode);

+	PINSEL_SetOpenDrainMode(PinCfg->Portnum, PinCfg->Pinnum, PinCfg->OpenDrain);

+}

+

+

+/**

+ * @}

+ */

+

+/**

+ * @}

+ */

+

+/* --------------------------------- End Of File ------------------------------ */

diff --git a/firmware/lpc17xx/lpc17xx_pinsel.h b/firmware/lpc17xx/lpc17xx_pinsel.h
new file mode 100644
index 0000000..6d46b73
--- /dev/null
+++ b/firmware/lpc17xx/lpc17xx_pinsel.h
@@ -0,0 +1,210 @@
+/***********************************************************************//**

+ * @file	: lpc17xx_pinsel.h

+ * @brief	: Contains all macro definitions and function prototypes

+ * 				support for Pin connect block firmware library on LPC17xx

+ * @version	: 1.0

+ * @date	: 25. Feb. 2009

+ * @author	: HoanTran

+ **************************************************************************

+ * Software that is described herein is for illustrative purposes only

+ * which provides customers with programming information regarding the

+ * products. This software is supplied "AS IS" without any warranties.

+ * NXP Semiconductors assumes no responsibility or liability for the

+ * use of the software, conveys no license or title under any patent,

+ * copyright, or mask work right to the product. NXP Semiconductors

+ * reserves the right to make changes in the software without

+ * notification. NXP Semiconductors also make no representation or

+ * warranty that such application will be suitable for the specified

+ * use without further testing or modification.

+ **************************************************************************/

+

+/* Peripheral group ----------------------------------------------------------- */

+/** @defgroup PINSEL

+ * @ingroup LPC1700CMSIS_FwLib_Drivers

+ * @{

+ */

+

+#ifndef LPC17XX_PINSEL_H_

+#define LPC17XX_PINSEL_H_

+

+/* Includes ------------------------------------------------------------------- */

+#include "LPC17xx.h"

+#include "lpc_types.h"

+

+#ifdef __cplusplus

+extern "C"

+{

+#endif

+

+

+/* Private Macros ------------------------------------------------------------- */

+/** @defgroup PINSEL_Private_Macros

+ * @{

+ */

+

+/** @defgroup PINSEL_REGISTER_BIT_DEFINITIONS

+ * @{

+ */

+

+/* Pin selection define */

+/* I2C Pin Configuration register bit description */

+#define PINSEL_I2CPADCFG_SDADRV0 	_BIT(0) /**< Drive mode control for the SDA0 pin, P0.27 */

+#define PINSEL_I2CPADCFG_SDAI2C0	_BIT(1) /**< I2C mode control for the SDA0 pin, P0.27 */

+#define PINSEL_I2CPADCFG_SCLDRV0	_BIT(2) /**< Drive mode control for the SCL0 pin, P0.28 */

+#define PINSEL_I2CPADCFG_SCLI2C0	_BIT(3) /**< I2C mode control for the SCL0 pin, P0.28 */

+

+/**

+ * @}

+ */

+

+/**

+ * @}

+ */

+

+

+/* Public Macros -------------------------------------------------------------- */

+/** @defgroup PINSEL_Public_Macros

+ * @{

+ */

+

+/*********************************************************************//**

+ *!< Macros define for PORT Selection

+ ***********************************************************************/

+#define PINSEL_PORT_0 	((0))	/**< PORT 0*/

+#define PINSEL_PORT_1 	((1))	/**< PORT 1*/

+#define PINSEL_PORT_2 	((2))	/**< PORT 2*/

+#define PINSEL_PORT_3 	((3))	/**< PORT 3*/

+#define PINSEL_PORT_4 	((4))	/**< PORT 4*/

+

+

+/***********************************************************************

+ * Macros define for Pin Function selection

+ **********************************************************************/

+#define PINSEL_FUNC_0	((0))	/**< default function*/

+#define PINSEL_FUNC_1	((1))	/**< first alternate function*/

+#define PINSEL_FUNC_2	((2))	/**< second alternate function*/

+#define PINSEL_FUNC_3	((3))	/**< third or reserved alternate function*/

+

+

+

+/***********************************************************************

+ * Macros define for Pin Number of Port

+ **********************************************************************/

+#define PINSEL_PIN_0 	((0)) 	/**< Pin 0 */

+#define PINSEL_PIN_1 	((1)) 	/**< Pin 1 */

+#define PINSEL_PIN_2 	((2)) 	/**< Pin 2 */

+#define PINSEL_PIN_3 	((3)) 	/**< Pin 3 */

+#define PINSEL_PIN_4 	((4)) 	/**< Pin 4 */

+#define PINSEL_PIN_5 	((5)) 	/**< Pin 5 */

+#define PINSEL_PIN_6 	((6)) 	/**< Pin 6 */

+#define PINSEL_PIN_7 	((7)) 	/**< Pin 7 */

+#define PINSEL_PIN_8 	((8)) 	/**< Pin 8 */

+#define PINSEL_PIN_9 	((9)) 	/**< Pin 9 */

+#define PINSEL_PIN_10 	((10)) 	/**< Pin 10 */

+#define PINSEL_PIN_11 	((11)) 	/**< Pin 11 */

+#define PINSEL_PIN_12 	((12)) 	/**< Pin 12 */

+#define PINSEL_PIN_13 	((13)) 	/**< Pin 13 */

+#define PINSEL_PIN_14 	((14)) 	/**< Pin 14 */

+#define PINSEL_PIN_15 	((15)) 	/**< Pin 15 */

+#define PINSEL_PIN_16 	((16)) 	/**< Pin 16 */

+#define PINSEL_PIN_17 	((17)) 	/**< Pin 17 */

+#define PINSEL_PIN_18 	((18)) 	/**< Pin 18 */

+#define PINSEL_PIN_19 	((19)) 	/**< Pin 19 */

+#define PINSEL_PIN_20 	((20)) 	/**< Pin 20 */

+#define PINSEL_PIN_21 	((21)) 	/**< Pin 21 */

+#define PINSEL_PIN_22 	((22)) 	/**< Pin 22 */

+#define PINSEL_PIN_23 	((23)) 	/**< Pin 23 */

+#define PINSEL_PIN_24 	((24)) 	/**< Pin 24 */

+#define PINSEL_PIN_25 	((25)) 	/**< Pin 25 */

+#define PINSEL_PIN_26 	((26)) 	/**< Pin 26 */

+#define PINSEL_PIN_27 	((27)) 	/**< Pin 27 */

+#define PINSEL_PIN_28 	((28)) 	/**< Pin 28 */

+#define PINSEL_PIN_29 	((29)) 	/**< Pin 29 */

+#define PINSEL_PIN_30 	((30)) 	/**< Pin 30 */

+#define PINSEL_PIN_31 	((31)) 	/**< Pin 31 */

+

+

+/***********************************************************************

+ * Macros define for Pin mode

+ **********************************************************************/

+#define PINSEL_PINMODE_PULLUP		((0))	/**< Internal pull-up resistor*/

+#define PINSEL_PINMODE_TRISTATE 	((2))	/**< Tri-state */

+#define PINSEL_PINMODE_PULLDOWN 	((3)) 	/**< Internal pull-down resistor */

+

+

+/***********************************************************************

+ * Macros define for Pin mode (normal/open drain)

+ **********************************************************************/

+#define	PINSEL_PINMODE_NORMAL		((0))	/**< Pin is in the normal (not open drain) mode.*/

+#define	PINSEL_PINMODE_OPENDRAIN	((1)) 	/**< Pin is in the open drain mode */

+

+

+/***********************************************************************

+ * Macros define for I2C mode

+ ***********************************************************************/

+#define	PINSEL_I2C_Normal_Mode		((0))	/**< The standard drive mode */

+#define	PINSEL_I2C_Fast_Mode		((1)) 	/**<  Fast Mode Plus drive mode */

+

+

+/**

+ * @}

+ */

+

+

+/* Public Types --------------------------------------------------------------- */

+/** @defgroup PINSEL_Public_Types

+ * @{

+ */

+

+/** @brief Pin configuration structure */

+typedef struct

+{

+	uint8_t Portnum;	/**< Port Number, should be PINSEL_PORT_x,

+						where x should be in range from 0 to 4 */

+	uint8_t Pinnum;		/**< Pin Number, should be PINSEL_PIN_x,

+						where x should be in range from 0 to 31 */

+	uint8_t Funcnum;	/**< Function Number, should be PINSEL_FUNC_x,

+						where x should be in range from 0 to 3 */

+	uint8_t Pinmode;	/**< Pin Mode, should be:

+						- PINSEL_PINMODE_PULLUP: Internal pull-up resistor

+						- PINSEL_PINMODE_TRISTATE: Tri-state

+						- PINSEL_PINMODE_PULLDOWN: Internal pull-down resistor */

+	uint8_t OpenDrain;	/**< OpenDrain mode, should be:

+						- PINSEL_PINMODE_NORMAL: Pin is in the normal (not open drain) mode

+						- PINSEL_PINMODE_OPENDRAIN: Pin is in the open drain mode */

+} PINSEL_CFG_Type;

+

+/**

+ * @}

+ */

+

+

+/* Public Functions ----------------------------------------------------------- */

+/** @defgroup PINSEL_Public_Functions

+ * @{

+ */

+

+void PINSEL_SetPinFunc ( uint8_t portnum, uint8_t pinnum, uint8_t funcnum);

+void PINSEL_ConfigTraceFunc (FunctionalState NewState);

+void PINSEL_SetResistorMode ( uint8_t portnum, uint8_t pinnum, uint8_t modenum);

+void PINSEL_SetOpenDrainMode( uint8_t portnum, uint8_t pinnum, uint8_t modenum);

+void PINSEL_SetI2C0Pins(uint8_t i2cPinMode, FunctionalState filterSlewRateEnable);

+void PINSEL_ConfigPin(PINSEL_CFG_Type *PinCfg);

+

+/**

+ * @}

+ */

+

+

+#ifdef __cplusplus

+}

+#endif

+

+#endif /* LPC17XX_PINSEL_H_ */

+

+/**

+ * @}

+ */

+

+/* --------------------------------- End Of File ------------------------------ */

+

diff --git a/firmware/lpc17xx/lpc17xx_spi.c b/firmware/lpc17xx/lpc17xx_spi.c
index 622b1e7..b324116 100644
--- a/firmware/lpc17xx/lpc17xx_spi.c
+++ b/firmware/lpc17xx/lpc17xx_spi.c
@@ -26,6 +26,8 @@
 #include "lpc17xx_spi.h"

 #include "lpc17xx_clkpwr.h"

 

+#include <led.h>

+

 #define CHECK_PARAM(expr)

 

 /* Private Types -------------------------------------------------------------- */

@@ -63,6 +65,7 @@ static SPI_CFG_T spidat;
  ***********************************************************************/

 void SPI_IntHandler(void)

 {

+	LED_on();

 	SPI_DATA_SETUP_Type *xf_setup;

     uint16_t tmp;

 

diff --git a/firmware/src/p2m.c b/firmware/src/p2m.c
index d4ecb21..3f4f2f2 100644
--- a/firmware/src/p2m.c
+++ b/firmware/src/p2m.c
@@ -91,24 +91,32 @@ int main (void)
 

 #ifdef SPI

 

-#include "LPC17xx.h"

-#include <stdint.h>

-#include "uart.h"

+#include <cli.h>

 #include <wm8523.h>

+#include <led.h>

 

 int main (void)

-{ 

-  UARTInit(0, 115200);	/* baud rate setting */

+{

+	//	SystemCoreClockUpdate(); 

+	//  SystemInit();

 

-	UARTSend(0, (uint8_t *)"init\n\r", 6);

+	LED_Init();

 

-	WM8523_Init();

+  cli_init();

 

-  while (1) {

-		UARTSend(0, (uint8_t *)"hello\n\r", 7);

+	cli_write("init");

 

-		_delay( 1 << 22 );

-  }

+	_delay(1 << 22);

+

+	WM8523_init();

+

+	cli_write("pre");

+

+	_delay(1 << 22);

+

+	WM8523_configure();

+

+	cli_write("post");

 }

 

 #endif