diff options
author | Bent Bisballe Nyeng <deva@aasimon.org> | 2013-06-02 18:25:46 +0200 |
---|---|---|
committer | Bent Bisballe Nyeng <deva@aasimon.org> | 2013-06-02 18:25:46 +0200 |
commit | b2df34e622ddee5d51beb1e9e93d4ecbb1745e55 (patch) | |
tree | 88822c96df5c98c74130ae532936f5d2f034c5b6 /firmware/buspirate.cfg | |
parent | f547775b5a8c60f655bcdb0d10bbcdb1417f3890 (diff) |
Initial experiments with SPI.
Diffstat (limited to 'firmware/buspirate.cfg')
-rw-r--r-- | firmware/buspirate.cfg | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/firmware/buspirate.cfg b/firmware/buspirate.cfg new file mode 100644 index 0000000..8d85846 --- /dev/null +++ b/firmware/buspirate.cfg @@ -0,0 +1,35 @@ +# ========================================================= +# What: BusPirate Version 3b with OpenOCD support +# Using: USB serial on COM port 13 +# JTAG: <available pins & description> +# See: http://dangerousprototypes.com/docs/Bus_Pirate_JTAG_connections_for_OpenOCD +# Note: 1) If you have "normal" mode AND "0" pullup, +# THEN do not connect Vpu & VTref! +# 2) Cygwin uses serial USB COM ports as: +# /dev/ttyS[N-1] == /dev/comN +# Make sure it's not already used with +# any other terminal or programs... +# ========================================================= +interface buspirate +# Not yet implemented properly... +#transport select jtag +# Set the serial port to be used: +buspirate_port /dev/buspirate +#buspirate_port /dev/ttyS12 +# Set "normal" or "fast" (~1 MHz)communication speed: +buspirate_speed normal +# Turn OFF the voltage regulator: +#buspirate_vreg 0 +# --------------------------------------------------------- +# Remember that VTref (Vcc) is connected to pull-up's. +# If you are NOT using pull-up's with "normal" drain +# pin-mode, then do NOT connect Vpu to VTref! +# --------------------------------------------------------- +buspirate_mode normal +buspirate_pullup 0 +# --------------------------------------------------------- +#buspirate_mode open-drain +#buspirate_pullup 1 +# --------------------------------------------------------- +# This depends on the cable, you are safe with this option: +reset_config srst_only
\ No newline at end of file |