From 0153e57f0c3b696ddf88582d9545773e4e56caf6 Mon Sep 17 00:00:00 2001
From: Bent Bisballe Nyeng <deva@aasimon.org>
Date: Sun, 28 Dec 2014 12:59:45 +0100
Subject: I2S test.

---
 firmware/test/i2s/Makefile  |   9 +++-
 firmware/test/i2s/i2stest.c | 107 +++++++++++++++++++++++++++++++++++++++-----
 firmware/test/test.c        |  12 ++++-
 firmware/test/test.h        |   6 +++
 4 files changed, 120 insertions(+), 14 deletions(-)

diff --git a/firmware/test/i2s/Makefile b/firmware/test/i2s/Makefile
index ed7860c..c6673a9 100644
--- a/firmware/test/i2s/Makefile
+++ b/firmware/test/i2s/Makefile
@@ -27,7 +27,7 @@ RM = rm
 # Flags
 CFLAGS   = -W -Wall -Werror -O0 --std=gnu99 -fgnu89-inline -mcpu=cortex-m3 -mthumb
 CFLAGS  += -ffunction-sections -fdata-sections
-CFLAGS  += -I${DRV}
+CFLAGS  += -I${DRV} -I${LPC}
 ASFLAGS  =
 LDFLAGS  = --gc-sections
 
@@ -43,6 +43,8 @@ CSRCS  = \
 	${LPC}/system_LPC17xx.c \
 	${LPC}/startup_LPC17xx.c \
 	${DRV}/led.c \
+	${DRV}/cli.c \
+	${DRV}/uart.c \
 	${DRV}/i2s.c \
 	../test.c
 
@@ -97,6 +99,9 @@ flash: $(EXECNAME)
 	openocd -f ../../openocd.cfg \
 		-c 'flash write_image erase $(PROJ).bin' \
 		-c 'verify_image $(PROJ).bin' \
-		-c 'reset run'
+		-c 'reset run' || (sleep 1; openocd -f ../../openocd.cfg \
+		-c 'flash write_image erase $(PROJ).bin' \
+		-c 'verify_image $(PROJ).bin' \
+		-c 'reset run')
 
 -include $(CSRCS:.c=.d)
diff --git a/firmware/test/i2s/i2stest.c b/firmware/test/i2s/i2stest.c
index 31f5c20..8a2c598 100644
--- a/firmware/test/i2s/i2stest.c
+++ b/firmware/test/i2s/i2stest.c
@@ -26,35 +26,120 @@
  */
 #include <i2s.h>
 #include <led.h>
+#include <LPC17xx.h>
+
+#include <cli.h>
 
 #include "../test.h"
 
+#include "../../src/sample.h"
+unsigned int size = sizeof(samples) / sizeof(short);
+
+static uint32_t cnt = 0;
+static int num = 0;
+
+#if 1
+void I2S_IRQHandler (void)  
+{
+  num = 8 - i2s_get_state_tx_level();
+
+  for(int i = 0; i < num; i++) {
+    i2s_write_pcm_16_stereo(samples[cnt % size] * 10,
+                            samples[cnt % size] * 10);
+    //if((cnt % 24000) == 0) led_toggle();
+    //i2s_write_pcm_16_stereo(cnt, cnt);
+    //    if(cnt > (1<<16)) cnt = 0;    
+    cnt++;
+  }
+
+  /*
+  uint32_t RxCount = 0;
+
+  if ( LPC_I2S->I2SSTATE & 0x01 )
+  {
+	RxCount = (LPC_I2S->I2SSTATE >> 8) & 0xFF;
+	if ( (RxCount != RXFIFO_EMPTY) && !I2SRXDone )
+	{
+	  while ( RxCount > 0 )
+	  {
+		if ( I2SReadLength == BUFSIZE )
+		{
+		  LPC_I2S->I2SDAI |= ((0x01 << 3) | (0x01 << 4));
+		  LPC_I2S->I2SIRQ &= ~(0x01 << 0);	// Disable RX	
+		  I2SRXDone = 1;
+		  break;
+		}
+		else
+		{
+		  I2SRXBuffer[I2SReadLength++] = LPC_I2S->I2SRXFIFO;
+		}
+		RxCount--;
+	  }
+	}
+  }
+  return;
+*/
+}
+#endif
+
 int main (void)
 {
   led_init();    
-
+  cli_init();
+  /*
   // From: tools/clkcalc 48000 16 2
-  int pclkdiv = 1;
-  int bitrate = 24;
-  int x = 96;
-  int y = 125;
+  int pclkdiv = 8;
+  int bitrate = 3;
+  int x = 57;
+  int y = 59;
+  // err = 16.949153 bits/second
 
   int bitwidth = 16;
   int channels = 2;
 
   int res = i2s_init(pclkdiv, bitrate, x, y, bitwidth, channels);
+  */
+  int res = i2s_clkcalc_init(48000, 16, 2);
 
   if(res) error();
 
+  // BUG? 4pin mode = 0 works for some reason...?
+	i2s_set_tx_mode_control(CLK_TX_SRC, 0, 1);
+
+  //  i2s_tx_reset_fifo();
+  /*
+  // Set up IRQ
+  uint32_t *i2sirq = (uint32_t*)0x400A801C;
+  // *i2sirq &= ~(0b1111 << 16); // Reset tx irq depth
+  int depth = 4;
+  *i2sirq |= ((depth & 0b1111) << 16); // Set tx irq depth
+  *i2sirq |= 0b1 << 1; // Enable IRQ, pg. 479 table 412
+
+  NVIC_EnableIRQ(I2S_IRQn);  // I2S_IRQn = 27;
+  */
   i2s_tx_start();
 
-  //  success();
+  cli_printf("loop...\n");
 
-  int16_t s = 0;
+  //  int32_t *fifo = (int32_t*)0x400A8008;
   while(1) {
-    //while(i2s_get_state_tx_level() < 3) {}
-    i2s_write_pcm_16_stereo(s, s);
-    if((s % 2) == 0) led_toggle();
-    s++;
+    while(i2s_get_state_tx_level() > 7) {}
+    //    i2s_write_pcm_16_stereo(cnt, cnt);
+    // *fifo = cnt;
+
+    //    *fifo = (cnt / 40) | (cnt / 40) << 16;
+    if(cnt < size) {
+      i2s_write_pcm_16_stereo((samples[cnt] - 485) * 10,
+                              (samples[cnt] - 485) * 10);
+    } else {
+      // repeat last sample
+      i2s_write_pcm_16_stereo(0, 0);
+    }
+
+    if(cnt > size * 10) cnt = 0;
+
+    //    if(cnt > 64000) cnt = 0;
+    cnt++;
   }
+
 }
diff --git a/firmware/test/test.c b/firmware/test/test.c
index 8671c5e..00cfac5 100644
--- a/firmware/test/test.c
+++ b/firmware/test/test.c
@@ -30,7 +30,7 @@
 
 volatile int temp;
 
-static void delay(int del)
+void delay(int del)
 {
   int i;
   for(i = 0; i < del; i++) {
@@ -48,6 +48,16 @@ static void blink(int t)
 	}  
 }
 
+void number(int num)
+{
+  int i;
+  for(i = 0; i < num * 2; i++) {
+    led_toggle();
+    delay(1 << 20);
+  }
+  delay(1 << 23);
+}
+
 void error()
 {
   blink(17);
diff --git a/firmware/test/test.h b/firmware/test/test.h
index 9ab8484..adc4e2f 100644
--- a/firmware/test/test.h
+++ b/firmware/test/test.h
@@ -30,4 +30,10 @@
 void error();
 void success();
 
+void delay(int loop);
+/**
+ * Flash number, then pause
+ */
+void number(int num);
+
 #endif/*__PEDAL2METAL_TEST_H__*/
-- 
cgit v1.2.3